Fireplace installation in Gardena CA - a surround that looks like part of your house
No fireplace, or an old one you never light? We help you pick gas, an insert or electric and build the brick around it.
What goes into adding a fireplace to a Gardena home?
Fireplace installation in Gardena, CA usually means setting a factory-built gas fireplace, insert or electric unit into your home, because most new fireplaces are engineered by major makers instead of laid up from brick, and then finishing it in brick or stone so it fits the room. Liberty Gardena Concrete and Masonry is based in Gardena and does this work in many of the cities around it, so if you're not sure we cover your address, just ask.
Most calls start with a living room that has no fireplace, or an old one nobody lights. The price moves with the type you pick, whether you've got a chimney we can reuse, how far the vent or line has to run and how much brick or stone goes around it. The schedule turns on the same things, since new framing and venting take longer than an insert, and on the city's plan review when a permit is needed. Gardena requires a building permit for most residential construction, but its list doesn't name fireplaces, so I'll check with the city's building services whether yours needs one and tell you either way.
- Licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
Fireplaces, stone and block work
How we handle fireplace installation
I start with what your house already has. If there's a sound chimney, an insert is usually the easy route, and hearth industry guidance says one can turn a fireplace you rarely light into a handy zone heater that helps keep heating bills down. With no chimney, we look at a gas unit with its own vent, or an electric one, which the same guidance describes as plug-and-play, set up much like a TV or a stereo. Once you've picked, we frame the opening, set the unit and build the brick or stone face around it so it looks like it was always part of the house. We cover the floors and furniture near the work and clean up as we go, because you're living there while we build.
A fireplace usually brings more masonry with it. If you want the wall or the chimney breast faced in stone, that's our stone veneer installation work, and when a raised hearth or a built-out surround needs a solid core behind the finish, we build it the same way we build concrete block walls.
Why Gardena homeowners call Liberty Gardena Concrete and Masonry for a fireplace
I look at every job myself
I come out to size up every job, and my own small crew and I do the work. The person who quotes your fireplace is the one who builds it, so nothing gets lost between the visit and the job.
Trained on new construction sites
I learned masonry laying block and brick on new construction and started this business in Gardena in 2023. We build a surround the way it gets checked on a new build, once and right, and we treat your house like someone lives there, because someone does.
Licensed and insured in California
We're licensed and insured, which counts when the work goes inside the room you live in. The promise behind every job is short. Your satisfaction, guaranteed.
Plans ready for Gardena's review
Before any building-related installation, the city wants an application and plans, and its review looks at structure, earthquake safety and fire protection. When your job needs a permit, we take it out under our license and set up the inspections, so you're not chasing paperwork.
On a fireplace, the type has to fit your house and the surround has to be built right the first time. Call (424) 528-1318 or send us the form to set up a visit.
Get a free on-site fireplace estimate
Send the form and we'll reply within one business day to set a time. I'll come out, measure and look at your chimney or wall, then give you a written estimate, free and with no obligation.
- Licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
What happens when you call about a fireplace in Gardena?
Call or send the form
Call (424) 528-1318 or use the form, and tell us the fireplace type you want and whether your house has a chimney. We'll set a time for me to come out.
I come out and measure
I come out myself with a tape and a few questions and look at the chimney, the wall and where the vent or power would run. You get a written estimate that says what I'd do and why, so you know what you're paying for before anything starts.
We clear the city's review
If your job needs a permit, Gardena's plan check should take about 10 business days on a first submittal and 5 on a resubmittal, unless a special approval is needed. We set your install date after it clears, so your living room isn't torn open while you wait.
We build, clean up, walk through
My crew and I set the unit and build the brick or stone around it, and on a permitted job the city's inspectors check the work at various stages against the approved plans. We clean up, then I walk the finished fireplace with you.
Fireplace installation questions
What is the best way to add a gas fireplace to a house with no chimney?
A direct-vent gas fireplace is usually the answer, because it vents through a wall or roof pipe and doesn't need a masonry chimney. If your house does have a chimney, an insert can reuse it with a new liner, and national guidance says an insert going into an existing fireplace is the most common gas fireplace job. I'll tell you which fits once I've seen your wall and roof.
How long does fireplace installation take in Gardena?
Industry guidance puts most gas fireplace projects at one to three days, with an insert going into a sound existing fireplace at the short end. New framing, venting and surround work stretch that, so a brand-new fireplace takes longer, and a permitted job also waits on the city's plan check described above.
How much does fireplace installation cost in Gardena, CA?
Fireplace and chimney installation in the Los Angeles area usually costs about $3,000 to $17,000 per project. That's the area's usual price, not our quote. Our estimates are free and done in person, so you see your own figure before you decide anything.
Who can pull a permit for a fireplace in Gardena?
Only properly licensed people, or people specifically exempt under the state's contractor license law, can take out permits in Gardena. A contractor needs a valid state contractors license and a current City Business License, and you can check permit questions with the city's building services. Ask who's pulling the permit before work starts, because the city warns that unpermitted work causes problems when you sell and can void your fire and homeowner's insurance coverage for that work.
Are factory-built fireplaces expensive?
Usually not as much as people think, and the hearth industry's trade association calls factory-built units surprisingly inexpensive. The unit is only part of the job, though, since the venting, the framing and the brick or stone around it add to the total.
What kinds of fireplaces can I put in my living room?
Factory-built fireplaces come in a range of sizes and styles, including see-through, corner and peninsula models. A see-through unit can sit between two rooms and a corner model suits a room without a good flat wall, so we build the surround to fit whichever shape you choose.
Work that goes with fireplace installation
Stone veneer installation
Stone veneer faces the fireplace wall or the whole chimney breast in stone, so the new unit reads as part of your room instead of an add-on.
Concrete block walls
Block gives a raised hearth, a built-out surround or an outdoor fireplace a solid, square core, so the brick or stone finish has something firm behind it.